Split rings for strap

Bobonli

Established
Local time
12:07 AM
Joined
Sep 12, 2009
Messages
137
I was in the right place at the right time to re-enter the M-ecosystem and scored an immaculate M4-P. Whomever bought this in 1983 must have immediately put it in a safe, in its original box. What it doesn't have is the little split ring gizmo that connects to a strap. All of my existing cameras have larger connectors through which you run a loop of strap through. Obviously I'll need to get a split ring strap but in the meantime is there a source for a suitable ring-connector or do I just run down to the hardware store and grab two off the keychain display?

In another forum, someone suggested that using a split ring will damage the eyelets on the camera body. Any science behind this, because they look like they were made to withstand the test of time.
 
M4-P didn't come with split rings. It came with a nylon Leica strap w it's own clips like these. The eyelets do wear. Peak Designs for example uses threaded nylon loops.
 

Attachments

  • s-l1600-1.jpg
    s-l1600-1.jpg
    94.1 KB · Views: 3
Dear Bobonli,

I bought these from Amazon.

They have other style and types of split rings with protective covers too.

Regards,

Tim Murphy

Harrisburg PA :)
 
Back
Top