How to keep dust off of negatives?
Old 1 Week Ago   #1
kknox
Registered User
 
kknox is offline
Join Date: Jan 2008
Posts: 975
How to keep dust off of negatives?

I have been self processing B&W film for years. I donít know why but when I scan my negatives, color or B&W I have to digitally remove many dust lines and spots. I clean the scanner and microfiber wipe the negatives. I also steam up the bathroom and take them down as fast as possible and put them in sleeves. Then use photo flow.

What does everyone do to not have to fight dust spots on your scanned negatives? Iím almost ready to send all my film out to a lab for developing and scanning. This was never a problem years ago
__________________
K.Knox
Just some old cameras.
  Reply With Quote

Old 1 Week Ago   #2
Dan Daniel
Registered User
 
Dan Daniel is offline
Join Date: Jan 2011
Posts: 1,542
Drying cabinet.

Ilford anti-staticum clothes.
  Reply With Quote

Old 1 Week Ago   #3
Erik van Straten
Registered User
 
Erik van Straten's Avatar
 
Erik van Straten is offline
Join Date: May 2008
Posts: 8,263
Before scanning, or printing, I wipe my negatives clean with a microfiber cloth. I have a professional double focal loupe that I keep on my head all the time to detect dust. I remove dust with a microfiber cloth or a large brush from badgers hair. Badgers hair is very good for removing dust.

I scan prints as soon as they are dry. They do not get the time to get dusty.

Erik.
  Reply With Quote

Old 1 Week Ago   #4
Mcary
Registered User
 
Mcary is offline
Join Date: Aug 2009
Location: Virginia USA
Age: 57
Posts: 1,770
My solution was to not look at film scan at 100% but rather at print resolution say 25 or 50% view in LR. I'm working on a MAC so another think I would do is make a print to PDF at size I would print the image say 11x14 or 10x15 and look at that to see if I'd missed any spots. We've gotten so used to reviewing digital shots at 100% that we think everything needs to be reviewed at 100% which may not always be the case.
__________________
M. Cary
Trying to see something new whither I'm visiting someplace new or a place that I've visited many a time before.


  Reply With Quote

Old 1 Week Ago   #5
Bingley
Registered User
 
Bingley's Avatar
 
Bingley is offline
Join Date: Oct 2006
Location: Sacramento, California
Posts: 5,636
I deal with the dust problem all the time. Before scanning, I wipe down the area around my scanner with a damp paper towel. I wipe down the glass plate on the scanner with an anti-static cloth. Finally, I carefully brush the negatives with soft brush just before scanning. This approach doesn't eliminate all dust spots, but it significantly reduces what I have to correct in Lightroom.
__________________
Steve

FS: Zeiss-ZM Planar 50 plus hood, Pentax MX, Voigtlander Ultron 40/2.0 SLII in Pentax K-mount, Takumar 100/2.8 and 35/3.5 lenses: See my ads in Classifieds

M3, M2, R2A, IIIc, IVSB2, & T, and assorted LTM & M lenses
Minolta XD11, Pentax ME Super, and assorted MD Rokkor and Takumar lenses, Rolleicord III, Rolleicord Vb, Rolleiflex Automat MX-EVS

My Flickr
My Gallery
  Reply With Quote

Old 1 Week Ago   #6
Steve M.
Registered User
 
Steve M. is offline
Join Date: Jun 2009
Posts: 3,381
Scanners magnify not only grain, but dust too. What used to be a dust problem for me when I scanned negs, went away once I started wet printing. I use a glassless negative carrier in my enlarger, but even w/ a glass holder, I had very few problems w/ this. A drying cabinet is not necessarily better than simply hanging the negs up to dry in a bathroom after running hot water in the shower for a spell and closing the door until they're dry. No peeking! The air will rush in, and w/ it, the dust. Just leave them be for an hour or so, take them down, and immediately cut them into strips and put them into print sleeves.
  Reply With Quote

Old 1 Week Ago   #7
Gregm61
Registered User
 
Gregm61 is offline
Join Date: Jan 2015
Posts: 443
I believe Erik's comment about scanning as soon as the negatives are dry is definitely a best practice. I have deferred to a lab for processing that scans my negatives to DNG so I can work them just like my digital camera raw files. They email me zip files with the images, which are "straight scans" with no additional processing and the subsequent dust spotting I have to do is very minimal to none. No doubt they run the entire roll through the scanner before cutting and sleeving the negatives to mail back to me.
  Reply With Quote

Old 1 Week Ago   #8
Ko.Fe.
Kostya Fedot
 
Ko.Fe.'s Avatar
 
Ko.Fe. is offline
Join Date: Jul 2013
Location: MiltON.ONtario
Posts: 7,191
I'm not touching my negatives. Photo Flo and Rocket Blower only.

And printing under enlarger is way better than scanning in terms of the dust and scratches.
  Reply With Quote

Old 1 Week Ago   #9
Erik van Straten
Registered User
 
Erik van Straten's Avatar
 
Erik van Straten is offline
Join Date: May 2008
Posts: 8,263
Quote:
Originally Posted by Ko.Fe. View Post

And printing under enlarger is way better than scanning in terms of the dust and scratches.

Depends on the type enlarger you use. A light point source enlarger reproduces every small scratch or irregularity on the negative. A diffusor enlarger (coldlight) or an enlarger with reflected light (the old Leitz enlargers with their convex reflectors above the lamp) are very dust friendly, above all when filters are used for variable contrast papers.


Erik.
  Reply With Quote

Old 1 Week Ago   #10
charjohncarter
Registered User
 
charjohncarter's Avatar
 
charjohncarter is offline
Join Date: Dec 2006
Location: Danville, CA, USA
Posts: 8,682
I've greatly reduced my dust problem. (1) I squeegee my negatives after a wash, photoflo, and then a final rinse with filtered water. I squeegee with two fingers and I do it twice (35mm and 120). (2) THEN I dry in a 4 inch wide black plastic pipe that stands vertical. I takes much longer to dry and I could speed it up with an air filter and small fan. But I don't care how long, so I didn't include that.
  Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -8. The time now is 14:14.


vBulletin skin developed by: eXtremepixels
Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.

All content on this site is Copyright Protected and owned by its respective owner. You may link to content on this site but you may not reproduce any of it in whole or part without written consent from its owner.