maco mitsubishi 100 35mm film?!?!?

[emraphoto]

i just bought 100 rolls of mitsubishi 100 asa b+w 35mm film for a very REASONABLE price (1.50 a roll shipped to my door). anybody have experience with it? from the general internet "rumours" i have found it appears to be basically apx 100 rebranded. produced by maco (german film and paper specialist).
looking for developing info and experience with rating it at 400...
cheers
john

[luketrash]

I keep seeing people trying to peddle it on ebay, but to me 1.50/roll of 24 isn't that great of deal. If indeed, it is APX100, you can get a better price on bulk APX100 at freestyle photo or even www.ultrafineonline.com

When I ordered Ultrafine's house brand 125iso film, they sent me a bulk roll of APX100 as well (perhaps a mistake?)

[haagen_dazs]

check with "david murphy" on this forum. he sells alot of it and probably uses it oo

[back alley]

do a search, there are a few threads on this film...

i started this one

joe

[emraphoto]

well there's lot's of pntificating as to who actually makes the film etc. but i'm REALLY looking for is developing info. any experience with rating it at higher iso etc....
any advice would be well aprreciated!
john

[back alley]

did you look at the thread i linked to?
there is dev info in it.

there is also the massive developer chart, look under maco.

joe

[emraphoto]

i guess i have to look a little harder. i thought "i posted one here" meant on rff... not that "here" was actually a link!
duh...
thanx joe
how about rating it at 400? looking for a developing time for tmax developer... any hints

[back alley]

massive dev chart


Maco UP100p Promicrol 1+9 100 5 5 5 20C
Maco UP100p Promicrol 1+9 100 3.5 3.5 3.5 24C
Maco UP100p Promicrol 1+14 100 7.5 7.5 7.5 20C
Maco UP100p Promicrol 1+14 100 5.25 5.25 5.25 24C
Maco UP100p/PO100c Atomal stock 100 7 7 7 20C
Maco UP100p/PO100c Calbe A49 stock 100 8 8 8 20C
Maco UP100p/PO100c D-76 stock 100 5-7 5-7 5-7 20C
Maco UP100p/PO100c Ecoprint Universal 1+12 100 5 5 5 20C
Maco UP100p/PO100c Ecoprint Universal 1+12 100 4-5 4-5 4-5 20C
Maco UP100p/PO100c HC-110 B 100 5 5 5 20C
Maco UP100p/PO100c ID-11 stock 100 5-7 5-7 5-7 20C
Maco UP100p/PO100c Ilfosol S 1+9 100 5 5 5 20C
Maco UP100p/PO100c Ilfotec HC 1+5 100 5 5 5 20C
Maco UP100p/PO100c LP-Supergrain 1+7 100 5 5 5 20C
Maco UP100p/PO100c LP-Xtratol XS 1+4 100 16-18 16-18 16-18 20C
Maco UP100p/PO100c LP-Xtratol XS 1+4 100 18 18 18 20C
Maco UP100p/PO100c Microphen stock 100 7 7 7 20C
Maco UP100p/PO100c Perceptol stock 100 7-9 7-9 7-9 20C
Maco UP100p/PO100c Rodinal 1+25 100 8 6-8 8 20C
Maco UP100p/PO100c Sprint Standard 1+9 100 10 20C
Maco UP100p/PO100c Tanol 1+1+100 80(UP) 50(PO) 14 14 22C [notes]
Maco UP100p/PO100c TMax Dev 1+4 100 4-6 4-6 4-6 20C
Maco UP100p/PO100c Ultrafin 1+10 100 5-7 5-7 5-7 20C [notes]
Maco UP100p/PO100c Ultrafin 1+20 100 8-10 8-10 8-10 20C [notes]
Maco UP100p/PO100c Xtol 1+2 100 13-16 13-16 13-16 20C [notes]
Maco UP100p/PO100c Xtol 1+2 200 20 20 20 20C

[emraphoto]

ok... i do appreciate your efforts (and patience). question... if i am rating the film at 400 would i then assume i'd time it at the higher end of the time listing? ie; tmax developer states 4-6 min's. would 6 min's then suffice for rating the film at 400?

[emraphoto]

the site for mitsubishi say tmax developer 4+1 5mins at 20 degree's (at iso 100)

[Dougg]

Fair to assume rating an ISO 100 film at EI 400 would tend to sacrifice shadow detail and boost contrast... if that's what you want.

[BrianPhotog]

Originally Posted by emraphoto

i guess i have to look a little harder. i thought "i posted one here" meant on rff... not that "here" was actually a link!
duh...
thanx joe
how about rating it at 400? looking for a developing time for tmax developer... any hints

I leant some rolls of my Gekko to a friend and he shot them at 400 and dev'd them in TMax developer. The results are here:

http://www.photomalaysia.com/forums/...ad.php?t=19092