Go Back   Rangefinderforum.com > Cameras / Gear / Photography > Leicas and other Leica Mount Cameras > Leica M -- Leica CL / Minolta CLE

Leica M -- Leica CL / Minolta CLE This forum is about all things Leica CL and Minolta CLE, remarkable compact M cameras

Reply
 
Thread Tools Search this Thread Display Modes

CLE Spear parts?
Old 3 Weeks Ago   #1
fimbul
Registered User
 
fimbul is offline
Join Date: Aug 2012
Posts: 13
CLE Spear parts?

Hello,
If the electronics in CLE stops working, is it possible to use spear parts (shutter button etc.) from the XG slr or others? I read something about this long time ago.
Thanks for any answer.
  Reply With Quote

Old 3 Weeks Ago   #2
sevo
Fokutorendaburando
 
sevo is offline
Join Date: Oct 2008
Location: Frankfurt, Germany
Posts: 6,297
The CLE had the XG shutter button - that is the prominent (and wear prone) part where you can plug in the XG equivalent with minor tweaking. Beyond that, much of the similarities are only exploitable by a skilled service technician. Once you break down the shutter or electronics into their individual parts, about 90% of the small parts are common to them, but due to the difference in size, they do not share entire modular components beyond the already mentioned shutter button/time knob - module dimensions and solder point positions are different (and the CLE has a entirely different focusing and AE system in any case).

In a nutshell, a XG is a good source for small parts for the CLE, but it will not supply you with a drop in transport mechanism or shutter. But as far as the most common electronics failure (the wiper contacts under the time knob) is concerned, you would be lucky...
  Reply With Quote

Old 3 Weeks Ago   #3
Palaeoboy
Joel Matherson
 
Palaeoboy is offline
Join Date: Oct 2005
Location: Australia
Posts: 629
Quote:
Originally Posted by fimbul View Post
Hello,
If the electronics in CLE stops working, is it possible to use spear parts (shutter button etc.) from the XG slr or others? I read something about this long time ago.
Thanks for any answer.
Sorry but its not quite so. Basically the spare parts exchange is pretty much a myth. People get confused that because the XG-1 has a similar non metering manual system that they therefore must share the same internals but they do not. Given the CLE has a unique metering system and matching shutter in order to facilitate that there is virtually nothing interchangeable. The circuit boards of the CLE are singular and unique.

Also it isnt the button itself thats the cause of anything specifically known to go wrong with the CLE. A contact problem associated with the shutter speed dial contacts that see corrosion building up and confusing the cameras electronics that you get what is known as the dancing LED phenomenon. Can the whole shutter speed dial of an XG be fitted to a CLE as a replacement? Yes. Are the the same as a CLEs? No. I have only ever seen it done once but essentially the CLE shutter dial profile is exceptionally low. It sits perfectly flush with the top of the camera. And XG dial is much taller and if fitted to a CLE has a replacement it will sit a fair bit higher than the cameras top. It worked but the camera had become a bit of a Frankenstein.

That said if a CLE electronics go completely, rather than erratic, then its most likely the circuit board itself and terminal. (Unless you have a replacement one)
  Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -8. The time now is 18:40.


vBulletin skin developed by: eXtremepixels
Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.

All content on this site is Copyright Protected and owned by its respective owner. You may link to content on this site but you may not reproduce any of it in whole or part without written consent from its owner.