Originally Posted by Jaava
Thank you guys for your help and info. I didn't know there are both 19mm and 22mm cups.
I put a new order to an UK based shop:
Hope this will be a fit
The new one (DK-3) wasn't a fit either. Actually it was less a fit than the first one (DK-19).
I took photos and added some measurements of the items:
Pic 1: My camera viewfinder and its eyepiece disassembled
The Users manual writes:
- The eyepiece socket of your camera is provided with a 19mm-diameter, 0,75mm-pitch screw thread. It will take any commercially available eyepiece, rightangle finder, magnifier, etc. (Fuji does not supply these accessories).
- The eyecup is made of rubber and is fitted on over the eyepiece.
I have bought the next two eycups (this far):
1. Nikon DK-19 eyecup
Pic 2: Nikon DK-19 eyecup (Chinese copy)
This is almost a fit. For a DIY oriented person this would be an easy cace.
According to seller: "Comparible With : NIKON D4, D3, D3S, D3X, D700, D800, F6, F5, F4, F3HP"
2. Nikon DK-3 eyecup
Pic 3: Nikon DK-3 eyecup (original)
This one is not at all for my camera: There is a hard piece in the rubber, and it is impossible to be "fitted on over the eyepiece" as the Users manual says.
Seller writes: "Genuine Nikon DK-3 Rubber Eyecup
Compatibility: FA, FE, FE2, FM, FM2, FM2n/New FM2, FM3A, EL2"
If I make a third attempt to buy, does somebody have a good guess about Nikon Rubber Eyecup that will fit?