Go Back   Rangefinderforum.com > Cameras / Gear / Photography > Coffee With Mentors > Canon Rangefinders - Peter Dechert and Peter Kitchingman

Canon Rangefinders - Peter Dechert and Peter Kitchingman Peter Dechert is best known for his Canon Rangefinder, Canon SLR, and Olympus Pen books, the latter two long out-of-print. He was a monthly columnist for many years for SHUTTERBUG magazine, and has contributed to many others. Most recently he has written about the pre-WW2 Zeiss 35mm cameras, but his interests in camera equipment and optics are many and varied. As a pro protographer and honorary life member of ASMP, Peter is also expert in using the gear! Peter Kitchingman - author of Canon Rangefinder Lens book Peter Kitchingman's 'Canon M39 Rangefinder Lenses 1939-71' book is the definitive source on these very interesting optics. His interests also go to the entire Canon Rangefinder system and beyond.

Reply
 
Thread Tools Search this Thread Display Modes

Will the Canon S-60 lens hood fit the 50mm f1.2 LTM?
Old 09-17-2016   #1
darinwc
Registered User
 
darinwc is offline
Join Date: Jun 2015
Posts: 35
Will the Canon S-60 lens hood fit the 50mm f1.2 LTM?

Will the Canon S-60 clamp-on lens hood fit the Canon 50mm f1.2 LTM lens? It is marked for the 50mm f1.4 FL lens, but it should fit any lens with a 58mm thread and an outer diameter of 59-60mm right?
  Reply With Quote

Old 09-17-2016   #2
Spavinaw
Registered User
 
Spavinaw is offline
Join Date: Aug 2009
Location: The Rocket City
Posts: 502
Yes, it fits perfectly. Not sure about the hood being marked for the 50mm f1.4. I was thinking the f1.4 had a 55mm thread.
__________________
Are we having fun yet?
  Reply With Quote

Old 09-17-2016   #3
peterm1
Registered User
 
peterm1's Avatar
 
peterm1 is offline
Join Date: May 2006
Posts: 4,019
I have this hood and I have a 50mm f1.2 LTM. And I use them together. In fact I am looking at them as I write. BUT......here's the thing. I found the 60mm internal diameter of the hood to be too large for the 58mm external diameter of the lens. Even tightened up to the max the clamp will not lock it on the lens. To correct this I shimmed the inside of the clamp fitting around the base of the lens hood with 4 small pieces of rubber fitted to the hood ' s clamping ring with thin double sided tape. I think what I used was the kind of stuff designed to stick on the base of objets d'art to prevent them scratching furniture. These are readily available in various thicknesses from hardware stores. Obviously you need something about 1mm thick for this purpose. Works fine but still a bit prone to letting the hood slip off if not careful. You can get thin cork or felt and use it similarly. Alternatively get a 58mm to 60mm step ring and use that but this may mean the hood is less stable on the ring. You may also need a 60mm UV filter on the ring to give the hood more to clamp onto if you go this route. (There is always more than one way to skin a cat.)

I believe you will find the lens hood was designed for use with the Canon 50mm f1.2 in FL bayonet mount which has a slightly larger diameter than its LTM cousin. I bought my hood quite cheaply on ebay thinking I was very lucky as hoods for the LTM lens are normally horrifically expensive. Only when I received it did I realize my mistake. Never mind all well that ends well.
  Reply With Quote

Old 09-18-2016   #4
mabelsound
Registered User
 
mabelsound's Avatar
 
mabelsound is offline
Join Date: Mar 2008
Location: Upstate NY
Age: 47
Posts: 6,181
Quote:
Originally Posted by Spavinaw View Post
Yes, it fits perfectly. Not sure about the hood being marked for the 50mm f1.4. I was thinking the f1.4 had a 55mm thread.
Not the rangefinder, the FL version!
__________________
flickr insta twitter
  Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -8. The time now is 11:12.


vBulletin skin developed by: eXtremepixels
Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.

All content on this site is Copyright Protected and owned by its respective owner. You may link to content on this site but you may not reproduce any of it in whole or part without written consent from its owner.