Adjust rangefinder on Konica Auto S3

[wilt]

Ran a test roll through a Konica Auto S3. Focusing is off, very off. Is it at all possible to calibrate at home?

[PhotoMat]

You can easily fine tune the rangefinder infinity adjustment by yourself. Open the camera back and you will see a screw on the upper left film rail. (See photo). This screw is merely a cover -- remove it and you can then access the rangefinder horizontal adjustment screw.

I used the full moon as an infinity target. The adjustment was simple and my S3 is now quite accurate. Good luck!

Matt

[wilt]

Thank you very much for this information!