Hexar RF still being serviced?

[Prosaic]

I am considering a used Hexar 50/2 kit. In case something breaks, will Konica be able to fix it?

[kully]

Where in the world do you live? In the UK, you can still get servicing and repairs done - but you'll have to Google the company handling this now, I sold my RF.

[Paul T.]

http://www.webercamera.com/

[Issy]

What about Sony?

[twopointeight]

I sent my RF to Sony in Tokyo with a #11 flashing sign in the LCD. Weber Repair didn't have the parts to fix that particular problem, Sony did. They charge a flat $200 for any repair, I was told.

[JapanExposures]

Originally Posted by twopointeight

I sent my RF to Sony in Tokyo with a #11 flashing sign in the LCD. Weber Repair didn't have the parts to fix that particular problem, Sony did. They charge a flat $200 for any repair, I was told.

That's not quite right (and I cannot imagine anyone offering a flat fee for any repair). I had a "11" shutter motor replacement done last week and the cost was around $150, took 3-4 days. They take the camera in and provide you with a precise estimate two days later and the work is done soon after. Could be done within a week I suppose.

Gotta love Japanese customer service standards.

[jonmanjiro]

Originally Posted by Megaperls

I cannot imagine anyone offering a flat fee for any repair.

Nikon does. Not a flat fee as such, but if the cost of a repair exceeds their predetermined limit, Nikon does not charge any more than that limit. In the case of a Nikon S3 2000, the limit is about 36,000 yen and in the case of a Nikon SP 2005, the limit is about 50,000 yen (I don't remember exactly). I think other camera manufacturers also charge for repairs using a similar system.

[aizan]

sony.com -> service and support -> electronics -> repair -> konica minolta -> krf-hexar

[hlockwood]

Originally Posted by aizan

sony.com -> service and support -> electronics -> repair -> konica minolta -> krf-hexar

I followed up on this with a call to Sony. They say there is only one official repair shop (in US?) for Konica Minolta products, including the HexRF.

It is:
Precision Camera Repairs
4 Anngina Dr.
Enfield CT 06082
888 746 8612

(That street address worries me a bit. )

I had a cla by Greg Weber and was pleased with the result. But Greg doesn't have the parts necessary to do all repairs.

Harry

[Issy]

hmmmm... I had a Nikon F100 that was consistantly underexposing that I decided to send locally (to Precision). After a couple of weeks, they determined it had to go back to Nikon Melville. (which I could have sent it in the first place).

Having a copy of the service manual for the RF, and knowing how little it says about what to do with a 10 or 11 code, I just wonder if faced with that code if it might be better to just send it to Japan.

[amateriat]

Originally Posted by hlockwood

I followed up on this with a call to Sony. They say there is only one official repair shop (in US?) for Konica Minolta products, including the HexRF.

It is:
Precision Camera Repairs
4 Anngina Dr.
Enfield CT 06082
888 746 8612

(That street address worries me a bit. )

I had a cla by Greg Weber and was pleased with the result. But Greg doesn't have the parts necessary to do all repairs.

Harry

Yep, that's the info I've had for a while. At least someone's handling things on this continent at this point.

Other than one hiccup with one Hexar (handled under warranty by KM shortly before their exit from the photo biz), I've had no problems with either of my two Hex bodies. They've been quite solid.


- Barrett

[akptc]

Originally Posted by aizan

sony.com -> service and support -> electronics -> repair -> konica minolta -> krf-hexar

The list may be quite outdated.. e.g. I just called to see if CRIS in AZ (listed on the Sony service website under krf-hexar) does indeed repair Hexars and they do not. Just fyi.

[rocheung]

oh I am very pleased to hear that. Sony is still taking care of us.

[Pablito]

Originally Posted by rocheung

Sony is still taking care of us.

Just like Big Brother! Don't count on it!

[jonmanjiro]

Alas, more times than not I've been charged the maximum so it certainly feels like a flat rate. Konica Minolta has the estimated repair cost for the Hexar RF listed here at 23,000 yen ($250)

[jonmanjiro]

Originally Posted by jonmanjiro

Konica Minolta has the estimated repair cost for the Hexar RF listed here at 23,000 yen ($250)

And of course, 23,000 yen was equivalent to $200 not that long ago ...

[sepiareverb]

In the US:

http://www.precisioncamera.com/profe...ra-repair.html

I have a Hexar RF there now, but it took 10 days in repair, instead of the three the quote generator said it would.

[reala_fan]

I just took out a repair ticket for a Rangefinder Alignment for a Hexar RF I bought on Ebay.

Will report back if the repair is successful. The online estimate was MORE than reasonable at $106.00 including return shipping.

I am hoping that, even is a part is needed, these folks will have it.

[sepiareverb]

Update on my Hexar at PCR:

Camera returned with RF way out of alignment- it was fine when it left. I have an email out to them to see what they want to do.

Is RF alignment a DIY fix with this camera?? I'm guessing the little cover on top gets one into the RF screw?

[reala_fan]

Ouy-Vay, Bob!!

RF 'way out of alignment' is why I sent my Hexar to PCR!!

I hope they do better by mine (and fix your alignment, too)..

[Issy]

Originally Posted by sepiareverb

Is RF alignment a DIY fix with this camera?? I'm guessing the little cover on top gets one into the RF screw?

To the horizontal, yes. Depends on how adventurous you are... it's easier with the cover removed.
There is one hidden screw under the rubber coating you will need to remove to get the top off.

http://www.rangefinderforum.com/foru...ead.php?t=1937

(note sure what happened to all the images in this thread)

[amateriat]

Originally Posted by sepiareverb

Update on my Hexar at PCR:

Camera returned with RF way out of alignment- it was fine when it left. I have an email out to them to see what they want to do.

Is RF alignment a DIY fix with this camera?? I'm guessing the little cover on top gets one into the RF screw?

When I sent my Hexars out to KM (before they decided to split the camera biz entirely), they tended to give the cameras the once-over, even if the issue with the camera was minor (i.e. they checked the VF even if I didn't specify a problem with it).

There's always the chance that the thing got smacked hard during shipping, but that's mere speculation on my part. I imagine they'll want the camera back to set things right.


- Barrett

[Krosya]

Originally Posted by sepiareverb

Update on my Hexar at PCR:

Camera returned with RF way out of alignment- it was fine when it left. I have an email out to them to see what they want to do.

Is RF alignment a DIY fix with this camera?? I'm guessing the little cover on top gets one into the RF screw?

If you remove a top cover - it's a fairly simple job. I had one of mine done - took all of 30 min. I wouldnt mess with just top cover - its easier to do with top off. There were some instructions online, maybe even from here some thread, but I dont have link on me now.

[Pablito]

well, you've all discovered worst flaw of this camera; RF does not stay in alignment. Mine went back to Konica several times back when Konica existed. They'd return it worse than when I sent it to them. Sold it in disgust.

[sepiareverb]

Originally Posted by Pablito

well, you've all discovered worst flaw of this camera; RF does not stay in alignment. Mine went back to Konica several times back when Konica existed. They'd return it worse than when I sent it to them. Sold it in disgust.

That would suck, the RF was fine all the time I used it before sending it in for the dread loose top-plate.