Canon 85 on a CLE focusing problem

[Bill58]

Yesterday, I put my new 85/1.8 Canon on my CLE w/ a CV 28/90 adapter but had a problem focusing. I could not see any split patch and the patch was a clear color at any distance, so portrait focusing was impossible at approx. 4 feet. I've had no problem w/ shorter focal lengths on this camera. Is this a camera base length issue or something else? If so, should I use the CLE with max 50mm lenses?

Thanks in advance for the advice.

Bill

[payasam]

May have something to do with the shape of the cam. Could be that the cam is like a tongue and does not align with the R/F's cam follower.

[Bill58]

May have something to do with the shape of the cam. Could be that the cam is like a tongue and does not align with the R/F's cam follower.

Thanks for the advice, but that's not the problem. I had already checked that. The tab on the lens does align with the cam follower on my Canon P (w/o the adapter, of course). Maybe I didn't properly align the red spot on the adapter w/ the tongue when I mounted the lens on the CLE?

[Lotari]

Could it be that the lens is physically too big for the camera, ie. in front of the rf window?

[Rogrund]

Could it be that the lens is physically too big for the camera, ie. in front of the rf window?

I don't think a 85/1.8 should block the rf window. My 50/1.2 doesn't...

Bill, have you tried with other adapters?

[payasam]

That the cam aligns with the Canon P's cam follower does not mean that the same thing happens on the CLE: it only shows that the lens is good. With M adapters there is no aligning to be done: you just screw them on until they can be turned no more. I'd suggest that you look at what's going on from the back. If I remember right, the entire back of the CLE slides off. Before that, you need to answer Antti's question.